+91-712-2420025 | info@chandakinstruments.com

Chandak Instruments Pvt. Ltd.

Chandak Instruments Pvt. Ltd.

The Flow Measurement Solution Provider

IMR 2800P

Combustion Gas Analyzer

imr2800p

THE ALL NEW IMR 2800 P Series

New Features:

  • Latest sensor technology for a more accurate measurement and longer life time
  • Improved interior design for easier service and better unit protection
  • Continuously and simultaneously measuring up to 18 parameters
  • Larger display for a better reading
  • Applications: Boilers, Burners, Engines, Turbines, Cars, Trucks, Plants, Chemical Industries, Steel Plants, Refineries, etc

Standard Features:

  • Portable combustion gas analyzer housed in a rugged aluminum case
  • Simultaneous measurement of
    • O2 Oxygen
    • NO2 Nitrogen dioxide
    • CO Carbon Monoxide
    • SO2 Sulfur dioxide
    • NO Nitric oxide
    • TG Flue-gas temperature
    • TA Ambient Air temperature
  • Calculation of following parameters
    • Losses / Efficiency
    • NOx Nitrogen Oxides
    • Excess Air / Lambda
    • CO2 Carbon Dioxide
  • 23 Fuels are programmed – 4 fuels are programmable
  • Automatic zero calibration
  • Integrated self-check program
  • Simultaneous display parameters on the illuminated display
  • Printer with programmable print out cycles
  • Standard deviation and average value calculation
  • Draft measurement with optional upgrade for differential draft and velocity measured with a Pitot tube
  • Unit selection : ppm – mg/Nm3 – mg/Nm3(ref O2)
  • Gas sampling probe E – length 0.8 ft (250mm), hose 8 ft (2.5m)
  • Rechargeable battery with charger
  • Power supply 110V or 230V or 12VDC Power Jack

Optional Features:

imr2800p

  • HCl, N2O, CL2, H2, NH3, HC or H2S measurement
  • CO2, CH4/HC and N2O NDIR sensors available
  • Speed RPM
  • Prepared for high temperature measurement (up to 2732 °F / 1500 °C)
  • Gas sampling probes with different lengths
  • Soot measurement
  • Pitot Tube
  • Gas Flow m/s
  • Additional Instruments: RPM Meter, Soot Meter

Testimonials

“Installation & Supervision has been key to flow measurement industry. Chandak Instruments Pvt. Ltd.’s focus on appropriate installation helped to achieve the expected results out of the flow meter”

Arabi Enertech, Kuwait

“Understanding the problem to extend practical solution is something what we have experienced. Their analysis & solution helped Dalmia Cement save recurring energy cost & efficiency in the process to improve quality of our material”

– Dalmia Cements Limited

PARAMETER PRINCIPLE RESOLUTION ACCURACY RANGE** STANDARD
O2 Oxygen Electro-chemical cell 0.1 Vol.% ± 0.2 Vol. % 0 – 20.9 Vol. %
CO Carbon monoxide Electro-chemical cell

NDIR

 1 ppm

0.001 Vol.%

 Z 0 – 2000/4000ppm

0 – 10/20 Vol.%

NDIR

Optional
NO Nitric oxide Electro-chemical cell 1 ppm Z 0 – 2000 ppm
NO2 Nitrogen dioxide Electro-chemical cell 1 ppm Z 0 – 100 ppm
SO2 Sulfur dioxide Electro-chemical cell 1 ppm Z 0 – 4000 ppm
H2S Hydrogen Sulfide Electro-chemical cell 1 ppm Z 0 – 200 ppm  
HC/CH4 Hydrocarbons Pellistor or NDIR 0.1 % Z 0 – 100% LEL  
TG Flue gas temperature NiCr – Ni thermocouple 1 K ± 2 % -4°F – 2192°F

0°C – 1200°C
TA Air temperature Semiconductor 1 K ± 0.2 K -4°F / 248°F

0°C – 120°C
P Draft Solid state 0.01 hPa ± 2 % ± 40 hPa
NOx Nitrogen oxides Calculation 1 ppm Z 0 – NOx max
CO2 Carbon dioxide Calculation 0.1 Vol.% ± 0.2 Vol. % 0 – CO2 max
CO2 Carbon dioxide NDIR 0.01 Vol.% ± 0.2 Vol. % 0 – 20 Vol. %  
NH3 Ammonia Electro-chemical 1 ppm Z 0 – 1000/5000 ppm  
N2O Nitrous Oxide NDIR 0.001 Vol. % Z 0 – 1 Vol. %  
HCl Hydrogen Chloride Electro-chemical 1 ppm Z 0 – 200 ppm  
Cl2 Chlorine Electro-chemical 1 ppm Z 0 – 5000 ppm  
H2 Hydrogen Electro-chemical 1 ppm Z 0 – 10000 ppm  
Losses / Efficiency Calculation 0.1 % ± 0.1 % 0 – 99.9 %
Excess Air / Lambda Calculation 0.1 % ± 0.1 % 1.0 – 9.99
Soot Filter paper method     0 – 9  
Velocity with Pitot tube Solid state 0.01 m/s ± 2 % 0 – 80 m/s  
RPM Meter Solid state 100 RPM ± 2 % 180 – 10000 RPM  
** Different/customized ranges available. Equipped with a maximum of 8 gas sensors

Z = 0 – 20 % of whole measurement range ± 5 %

21 – 100 % of whole measurement range ± 1 % of displayed measurement

MODEL - IMR 2800 P
Dimensions (inch): 15 x 6.5 x 12.4 = (375mm x 165mm x 300mm)
Weight: 17 lbs. (8 kg)

PART-NO. - IMR 28100