Chandak Instruments Pvt. Ltd.

The Flow Measurement Solution Provider

IMR IX170

Single Gas Detector

IX176a
The IX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines, and keeps the workers safe, prevents the facilities from being destroyed. The detector has a high-quality sensor, and uses natural diffusion as the method for detection. It has high sensitivity and reproducibility. The detector uses an embedded MCU controller, and is easy to operate. The shell has special high strength material and anti-slip rubber, and is water-proof, explosion-proof and dust-proof. The alarms are visual, and audible with vibration.

Can store up to 2,000 readings on the internal memory.

Data transfer software and USB cable included.

Model Range L-Alarm Range H-Alarm Range L-Alarm H-Alarm
IX176-CH4 0-100%LEL 10%LEL~5%LEL 25%LEL~80%LEL 20%LEL 50%LEL
IX176-C3H8 0-100%LEL 10%LEL~25%LEL 25%LEL~80%LEL 20%LEL 50%LEL
IX176-H2 0-100%LEL 10%LEL~25%LEL 25%LEL~80%LEL 20%LEL 50%LEL
IX176-H2 0-1000ppm 20ppm~150ppm 150ppm~500ppm 35ppm 250ppm
IX176-H2S 0-100ppm 5ppm~15ppm 15ppm~30ppm 10ppm 15ppm
IX176-CO low 0-1000ppm 25ppm~100ppm 100ppm~500ppm 35ppm 200ppm
IX176-CO high 0-2000ppm 25ppm~100ppm 100ppm~500ppm 35ppm 200ppm
IX176-O2 0-30%vol 16%vol~19.5%vol 22.5%vol~24%vol 19.5%vol 23.5%vol
IX176-C2H5OH 0-100%LEL 10%LEL~25%LEL 25%LEL~80%LEL 20%LEL 50%LEL
IX176-NH3 0-100ppm 20ppm~30ppm 30ppm~70ppm 25ppm 50ppm
IX176-CL2 0-20ppm 3ppm~10ppm 5ppm~15ppm 5ppm 10ppm
IX176-SO2 0-100ppm 1ppm~3ppm 3ppm~10ppm 2ppm 5ppm
IX176-NO 0-100ppm 5ppm~30ppm 30ppm~70ppm 2ppm 50ppm
IX176-NO2 0-20ppm 2ppm~5ppm 10ppm~20ppm 2ppm 10ppm
  • Gas sampling method: natural diffusion
  • Gas sensor type: catalytic (for combustible gas) and electrochemical (for H2S, CO, O2, NH3, CO2, SO2)
  • Accuracy: ±5%FS
  • Response time: T90 < 30s
  • Indication: LCD displays real-time and system status
  • LED, audio and vibration alert for gas leakage, fault and low voltage
  • Working environment: -20 to 50°C, 95% RH (no dew)
  • Power source: 3.6V DC Rechargeable Li-on battery 1,800Ah
  • Charging time: 4~6 hours
  • Working time: ≥10h continuously (without alarming)
  • Gas sensor life: 2 years
  • Explosion-proof grade: Exia II CT4
  • Protection grade: IP65
  • Weight: 200g (with battery)
  • Dimensions: 104 x 60.8 x 30.5mm
  • Communication: RS232/USB
  • Internal Memory – 2,000 records
  • Data transfer software included
  • USB cable included
  • Charger 110-230V 50/60Hz included
  • Clip for belt included
  • Calibration cover included

Optional Features:

  • Gas sampling probe
  • Carrying case
  • Sampling pump

Testimonials

“Installation & Supervision has been key to flow measurement industry. Chandak Instruments Pvt. Ltd.’s focus on appropriate installation helped to achieve the expected results out of the flow meter”

Arabi Enertech, Kuwait

“Understanding the problem to extend practical solution is something what we have experienced. Their analysis & solution helped Dalmia Cement save recurring energy cost & efficiency in the process to improve quality of our material”

– Dalmia Cements Limited

Telescoping Gas Probe:
IX616

IX616

Probe Length: 100 – 1150mm
Hose Length: 1500mm
Item#: EX660 - Gas probe
Sampling Pump:
IX616
Item#: IX176-Sampling pump